SciFiKitBash
5 ft Falcon - Mandible Pits - Printable Version

+- SciFiKitBash (https://scifikitbash.com)
+-- Forum: 3D Modeling (https://scifikitbash.com/forumdisplay.php?fid=6)
+--- Forum: 3D Parts for sharing (https://scifikitbash.com/forumdisplay.php?fid=17)
+---- Forum: Star Wars (https://scifikitbash.com/forumdisplay.php?fid=408)
+---- Thread: 5 ft Falcon - Mandible Pits (/showthread.php?tid=462)



5 ft Falcon - Mandible Pits - Dazza007 - 03-27-2024

I have started modelling the pits for anyone who is interested.
Where possible I have modelled the parts based on the Kit Scans.
The goal with these is to be resin printed.

Thought I'd throw a few a few photos of the first one up (needs a bit of tidying up in places) - and the others in this chat as I get through them, generally take a few days to model each one.

If anyone spots anything majorly incorrect, let me know, I will be tweaking them along the way to match all of the photos.

Once I am happy with my final versions I will upload the STLs, as well as pre-supported ones for anyone who wants to print them.

Cheers Darrin


RE: 5 ft Falcon - Mandible Pits - manugu - 03-27-2024

Looks great Darrin!
Would take me years to get this done Wink


RE: 5 ft Falcon - Mandible Pits - Dazza007 - 03-31-2024

Making some progress, I took a break from doing pits and decided to work on some of the other parts of the mandibles
Will model both sets fully, and then see how I can best deconstruct them for printing, and piecing back together easily.

Its a slow process, but enjoyable.

I have a few of these parts on the printer, just to see how they came out - will add some photos of the final prints in a few hours once they are complete


RE: 5 ft Falcon - Mandible Pits - Dazza007 - 04-01-2024

Here's the first run of prints, not looking too bad, still have a few minor tweaks here and there, but taking shape.

These are printed at 0.05mm, I will do the finals at a higher quality that that.

I've decided in future, rather than swamp this site with Work in Progress - I will put that all on the RPF forums, and just upload final models here, will make it easier to find things

so keep an eye on
https://www.therpf.com/forums/threads/yaff-yet-another-5-footer-falcon-build.344613
if you are interested, once I have some finals I will upload them here - I will delete the erroneous posts here in due course, just to keep things tidy


RE: 5 ft Falcon - Mandible Pits - jcoffman99 - 04-01-2024

(04-01-2024, 06:38 AM)Dazza007 Wrote: Here's the first run of prints, not looking too bad, still have a few minor tweaks here and there, but taking shape.

These are printed at 0.05mm, I will do the finals at a higher quality that that.

I've decided in future, rather than swamp this site with Work in Progress - I will put that all on the RPF forums, and just upload final models here, will make it easier to find things

so keep an eye on
https://www.therpf.com/forums/threads/yaff-yet-another-5-footer-falcon-build.344613
if you are interested, once I have some finals I will upload them here - I will delete the erroneous posts here in due course, just to keep things tidy

Very awesome work.


RE: 5 ft Falcon - Mandible Pits - manugu - 04-01-2024

I’ll keep an eye on both places anyway Wink
Fantastic how clean this looks, even the springs! Good work!!